Band Atlas · Compatibility reportReport · Generated · Data version https://www.aiotrf.com/en/ai/band-atlas/models/me910c1-ww/au/

Does the Telit ME910C1-WW work in Australia?

Yes: all 3 networks in Australia are good, through B1/B3/B5/B8/B28.

How to read this: coverage layers are bands below 1 GHz; they carry signal into rural areas and buildings. Missing one may still work in cities but suffer outdoors far away and indoors. Capacity layers affect speed and busy-hour experience.

Module bands from: Telit Cinterion (grade A); Sectron (grade B)

NetworkVerdictCompatibilitySupported bandsMissing bandsEvidence
Optusgood80%B1 B3 B28 B5 B8B7 B40A
Telstragood86%B1 B3 B8 B28B7A
Vodafonegood100%B1 B3 B5 B28—A

Low-power check: the bands LTE-M and NB-IoT are actually deployed on

NetworkLTE-M deployed onNB-IoT deployed on
TelstraB28 ✔not listed

✔ supported by the module ✘ not supported. The table above scores against all of the network's LTE bands; a low-power module only ever uses the bands here, so go by this table. The module's LTE-M and NB-IoT bands are listed together on this site and a few belong to one of the two only: see the model page. Source: Deutsche Telekom IoT documentation →

Other models good on every network in Australia

Need a network-by-network check for several countries, or an alternative model? Contact us →

Was this answer useful?