Does the Nordic nRF9160 work in Australia?
Yes: all 3 networks in Australia are good, through B1/B3/B5/B8/B28.
How to read this: coverage layers are bands below 1 GHz; they carry signal into rural areas and buildings. Missing one may still work in cities but suffer outdoors far away and indoors. Capacity layers affect speed and busy-hour experience.
Module bands from: Nordic Semiconductor (grade A); DigiKey (grade B)
| Network | Verdict | Compatibility | Supported bands | Missing bands | Evidence |
|---|---|---|---|---|---|
| Optus | good | 80% | B1 B3 B28 B5 B8 | B7 B40 | A |
| Telstra | good | 86% | B1 B3 B8 B28 | B7 | A |
| Vodafone | good | 100% | B1 B3 B5 B28 | — | A |
Low-power check: the bands LTE-M and NB-IoT are actually deployed on
| Network | LTE-M deployed on | NB-IoT deployed on |
|---|---|---|
| Telstra | B28 ✔ | not listed |
✔ supported by the module ✘ not supported. The table above scores against all of the network's LTE bands; a low-power module only ever uses the bands here, so go by this table. The module's LTE-M and NB-IoT bands are listed together on this site and a few belong to one of the two only: see the model page. Source: Deutsche Telekom IoT documentation →
Other models good on every network in Australia
All networks in Australia · All countries for the Nordic nRF9160 · How we score
Need a network-by-network check for several countries, or an alternative model? Contact us →