WindTre (Italy): 4G and 5G bands
WindTre (Italy) runs 4G on B1, B3, B7, B20; B20 is the coverage layer. 5G bands: n78, n258, n38. 5G SA: not found; RedCap: not launched; 3G: winding down; 2G: —.
Check your module in Italy
Results cover the 4 networks here; the home page checks every country at once.
Bands in detail
| Band | Name | Duplex | Uplink MHz | Downlink MHz | Layer | Checked |
|---|---|---|---|---|---|---|
| B1 | 2100 IMT | FDD | 1920–1980 | 2110–2170 | capacity layer | cross-checked12 |
| B3 | 1800 DCS | FDD | 1710–1785 | 1805–1880 | capacity layer | cross-checked12 |
| B7 | 2600 IMT-E | FDD | 2500–2570 | 2620–2690 | capacity layer | cross-checked12 |
| B20 | 800 Digital Dividend | FDD | 832–862 | 791–821 | coverage layer | cross-checked12 |
| B38 | 2600 IMT-E TDD | TDD | 2570–2620 | 2570–2620 | capacity layer | single source2 |
| n78 | 3500 C-Band | TDD | 3300–3800 | 3300–3800 | capacity layer | cross-checked12 |
| n258 | 26 GHz mmWave | TDD | 24250–27500 | 24250–27500 | capacity layer | cross-checked12 |
| n38 | 2600 IMT-E TDD | TDD | 2570–2620 | 2570–2620 | capacity layer | single source1 |
Frequencies are from the 3GPP specifications. “Single source” means only one community source lists the band; it is shown but not scored.
Network status
Our dongles on this network
Supports B1, B3, B7, B20 (coverage layer).
Supports B1, B3, B7, B20 (coverage layer).
Supports B1, B3. Missing the operator’s main band B20. Missing B7.
5G: 5G bands match, but no commercial RedCap yet (n78)
Sources
- C Frequency checker · Italy Kimovil · 2026-10-02
- C Wind (Italy), now WindTre: frequency bands; 2G, 3G, 4G and NB-IoT services FrequencyCheck · 2026-10-02
- B 5G RedCap – April 2026 (42 operators in 27 markets; 14 commercial launches) GSA · 2026-04
- C 3G switch-off in Italy: WindTre’s phase-out expected to finish by the end of 2025 ComparaSemplice · 2025
